Maretron TLM100 User Manual download pdf (Page 14)

TLM100 User’s Manual

2.5 Connecting the TLM100

There is one connection point (see Figure 6) for the TLM100: the NMEA 2000

connection.

Please refer to Section 2.5.1 for making NMEA 2000

connection.

Page 10 Revision 1.3

Figure 6 – TLM100 Connections

2.5.1 Connecting to NMEA 2000

Interface

The Maretron TLM100 provides a connection to an NMEA 2000

interface through a five pin

male connector (see Figure 7). You connect the TLM100 to an NMEA 2000

network using a

Maretron NMEA 2000

cable (or an NMEA 2000

compatible cable) by connecting the female

end of the cable to the TLM100 (note the key on the male connector and keyway on the female

connector). Be sure the cable is connected securely and that the collar on the cable connector

is tightened firmly. Connect the other end of the cable (male) to the NMEA 2000

network in

the same manner. The TLM100 is designed such that you can plug or unplug it from an NMEA

2000

network while the power to the network is connected or disconnected. Please follow

recommended practices for installing NMEA 2000

network products.

NMEA 2000

Connector

Cable to

Sensor

Component

Figure 7 – NMEA 2000

Connector Face Views

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 20 21

No comments

Maretron TLM100 User Manual Page 14